Cart 0
rode_news_shooter_newsshooter_kit.jpg

Rode RODELink Newsshooter Kit Digital Wireless System

SG$ 699.00

PRODUCT HIGHLIGHTS

Includes Transmitter and Receiver

Series II, 2.4 GHz Digital Transmission

128-Bit Encryption with 328' Range

48V Phantom Power

Locking XLR & 3.5mm TRS Inputs

OLED Display on Receiver & Transmitter

One Button Pairing & 8-Channel Switching

-20 dB Attenuation Pad on Receiver

Powered by AA or Sony NP-F Batteries

Headphone Output on Transmitter


The RODELink Newsshooter Kit from RODE is a wireless system for ENG (Electronic News Gathering) using series II 2.4 GHz digital transmission and 128-bit encryption. The system is able to constantly monitor and hop between frequencies to maintain the strongest possible signal level at a range of up to 328'. Both units are battery powered and can run for up to seven hours.
The receiver (RX-CAM) features an OLED display with information on level, battery status, mute, and channel selection. Underneath the OLED display, you'll find a pad that can attenuate signals between 0 and -20 dB. The receiver can be mounted on a standard camera shoe-mount with a 3/8" thread or a belt-clip. Through its on-board, locking 3.5mm dual-mono jack, you can monitor and/or record audio signal.

In addition to boasting its own OLED panel for monitoring battery and output level, the transmitter (TX-XLR) easily connects to XLR handheld presentation microphones as well as 3.5mm shotgun microphones and powered lavaliers. The transmitter provides 48V phantom power through its XLR input and plug-in power through the 3.5mm TRS input. If you're on the transmitting end of the signal, you can monitor the audio feed through its 3.5mm headphone jack.
Please note, however, that you cannot operate two microphones at the same time.
With all the above features, the RODELink Newsshooter Kit provides everything you need to start shooting video wirelessly with microphones boasting XLR or 3.5mm connections, be they a dynamic handheld capsule, powered shotgun mic, or compatible lavalier.
The receiver can interface with up to eight different TX-XLR transmitters, and you can use the channel switcher to select between each individual transmitter; please note, however, that you can only receive audio actively from one transmitter at a time
Compatible with any microphone sporting 3.5mm TRS or XLR connection points and necessitating power up to 48V
Battery can last for up to seven hours
Series II 2.4 GHz digital transmission with 128-bit encryption
Transmitter supplies 48V phantom power and plug-in power
Constantly monitors and hops between frequencies to maintain the strongest possible signal level at a range of up to 328'
OLED display on receiver and transmitter with information on level, battery status, mutes, and channel selection
Mounts on a standard camera shoe-mount and for added versatility the shoe mount can be located in one of two positions


General Specifications
Transmission Type2.4 GHz fixed frequency agile system
Dynamic Range112 dB
RangeUp to 328' / 100 m
Frequency Range35 Hz to 22 kHz
Maximum Output Level1 V Rms / 2.8 V P-p
Maximum Input Level1 V Rms / 2.8 V P-p
LatencyMaximum: 4 ms



Receiver
Model NumberRX-CAM
Power Source2 X AA battery or Micro-USB
AntennaInternal
Input Connections1/8" / 3.5 mm TRS locking mini-jack - dual mono
Input Impedance300 Ohms
Dimensions (H x W x D)4.4 x 2.6 x 2.0" / 111 x 65 x 52 mm
Weight6.7 oz / 190 g



Transmitter
Model NumberTX-XLR
Power Source2 X AA battery, Sony NP-F battery, or Micro-USB
Phantom PowerSupplies 48 V through XLR input jack
Plug-in powerSupplies plug-in power through 3.5 mm TRS jack
AntennaInternal
Input ConnectionsXLR with locking collar
1/8" / 3.5 mm TRS locking mini-jack socket
Input ImpedanceXLR: 1 kOhm 
3.5 mm TRS: 10 kOhms
Dimensions (H x W x D)4.7 x 1.8 x 1.8" / 120 x 45 x 45 mm
Weight7.8 oz / 222 g



Packaging Info
Package Weight1.6 lb
Box Dimensions (LxWxH)7.0 x 5.3 x 5.0"